{"id":3302,"date":"2026-09-01T22:47:34","date_gmt":"2026-09-01T14:47:34","guid":{"rendered":"http:\/\/www.tauaja.com\/blog\/?p=3302"},"modified":"2026-09-01T22:47:34","modified_gmt":"2026-09-01T14:47:34","slug":"are-there-any-special-techniques-for-making-resin-ornaments-4112-6cce95","status":"publish","type":"post","link":"http:\/\/www.tauaja.com\/blog\/2026\/09\/01\/are-there-any-special-techniques-for-making-resin-ornaments-4112-6cce95\/","title":{"rendered":"Are there any special techniques for making resin ornaments?"},"content":{"rendered":"

Hey there! As a resin ornaments supplier, I often get asked, "Are there any special techniques for making resin ornaments?" Well, you bet there are! In this blog, I’m gonna share some cool tricks and tips that’ve helped me create some really awesome resin ornaments over the years. Resin Ornaments<\/a><\/p>\n

<\/p>\n

First off, let’s talk about the basic stuff you need. You’ll obviously need resin – there are two main types, epoxy resin and polyester resin. I mostly use epoxy resin ’cause it’s more stable and gives a really clear finish. You’ll also need molds, which come in all sorts of shapes and sizes, from cute animals to geometric patterns. And you can’t forget about pigments and additives. Pigments are what give your ornaments color, and additives can do things like make the resin dry faster or change its texture.<\/p>\n

One of the most important techniques is proper mixing. When you’re working with resin, you have to mix the resin and the hardener really well. I usually use a stir stick and make sure to scrape the sides and bottom of the container as I stir. This helps to get rid of any air bubbles that might be trapped in the mixture. If you don’t mix it properly, the resin might not cure correctly, and your ornament will end up looking all wonky. I usually mix for about 3 – 5 minutes, depending on the amount of resin I’m using.<\/p>\n

Another cool technique is adding inclusions. Inclusions are basically little things you can add to your resin to make the ornaments more interesting. For example, you can add dried flowers, beads, or even small pieces of glitter. When you’re adding inclusions, it’s important to make sure they’re clean and dry. Otherwise, they can cause problems with the curing process. I like to arrange the inclusions in the mold first before pouring the resin over them. This way, I have more control over where they end up in the ornament.<\/p>\n

Now, let’s talk about dealing with air bubbles. Air bubbles are the bane of every resin crafter’s existence. But there are a few ways to get rid of them. One method is to use a heat gun. After you’ve poured the resin into the mold, you can gently wave the heat gun over the surface. The heat causes the air bubbles to rise to the surface and pop. Just be careful not to hold the heat gun too close or for too long, or you might end up melting the resin. Another method is to use a toothpick or a pin to pop the bubbles manually. This is a bit more time – consuming, but it’s really effective for getting rid of the smaller bubbles.<\/p>\n

When it comes to coloring the resin, there are a few things to keep in mind. You can use liquid pigments, which are really easy to work with. Just add a few drops to your resin mixture and stir well. But be careful not to add too much, or the resin might become too thick and difficult to pour. You can also use powder pigments. Powder pigments give a more intense color, but they can be a bit more tricky to mix evenly. I usually mix the powder pigment with a small amount of resin first to create a paste, and then I add that paste to the rest of the resin mixture.<\/p>\n

Curing is another crucial step. The curing time depends on the type of resin you’re using, the temperature, and the humidity. In general, epoxy resin takes about 24 – 48 hours to fully cure. During this time, it’s important to keep the ornaments in a warm, dry place. Avoid moving them around too much, as this can cause the resin to crack or warp. I usually let my ornaments cure for at least 48 hours just to be on the safe side.<\/p>\n

Once the ornaments are cured, you can do some finishing touches. You can sand the edges to make them smooth, and then polish the surface to give it a shiny look. You can also add a coat of varnish for extra protection.<\/p>\n

Now, let me tell you about some advanced techniques. One of my favorites is creating a gradient effect. To do this, you start by pouring a small amount of colored resin into the mold. Then, you add a layer of a different color on top. You can use a toothpick or a stir stick to gently blend the two colors together. This creates a really cool, ombre – like effect.<\/p>\n

Another advanced technique is making resin with a marble effect. You can do this by pouring different colors of resin into the mold in a random pattern. Then, use a toothpick to swirl the colors around. It takes a bit of practice to get the right look, but when you do, it looks really amazing.<\/p>\n

I’ve also experimented with creating resin ornaments with a 3D effect. You can do this by pouring multiple layers of resin, each with a different inclusion or color. This gives the ornament a sense of depth and dimension.<\/p>\n

As a resin ornaments supplier, I know that these techniques can really set your products apart. Whether you’re a hobbyist looking to make some unique gifts or a business owner looking to expand your product line, these techniques can help you create resin ornaments that people will love.<\/p>\n

<\/p>\n

If you’re interested in purchasing high – quality resin ornaments for your store or for personal use, I’d love to chat with you. We have a wide range of designs and colors to choose from, and we can even work with you to create custom ornaments. Just reach out to me, and we can start talking about your needs.<\/p>\n

Resin Small Photo Frame<\/a> References:<\/p>\n